National Portrait Gallery

About The National Portrait Gallery

The National Portrait Gallery specialises in displaying portraits of historically important British people. Since it was founded in 1856 its collection of portraits has grown to be the most extensive in the world. The site at St Martin’s Place near Trafalgar Square houses a significant proportion of these, although many reside in other locations around the UK, including in a number of houses managed by the National Trust. In 2009, visitor numbers to the National Portrait Gallery in St Martin’s Place exceeded 1.9 million people.

How powerPerfector was able to help The National Portrait Gallery

After the National Portrait Gallery sent its annual electricity consumption details, it was possible to give a provisional quote for a powerPerfector unit and the energy savings that would be expected. A voltage logger was then sent for one week, which recorded the voltage level in the building by connecting to it in to a regular mains socket. After a survey of the site by a powerPerfector Approved Contractor, the installation took place. There was no noticeable change to the operation of the building, although continuous carbon savings were instantly being made every day at the site. After the installation, the electricity consumption was analysed to find a reduction of 12%, equating to annual carbon dioxide emissions saving of 207,769kg.

Getting the source right

powerPerfector is the world’s only Voltage Power Optimiser, giving energy, carbon and cost savings by efficiently optimising a site’s supply voltage. By optimising the voltage, electrical equipment runs more efficiently and consumes less energy. The declared electricity supply in the United Kingdom is now, as a result of European Harmonisation, 230V with a tolerance of +10% to -6%. This means that effective voltage can be anywhere between 216V and 253V depending on local conditions. Most electrical equipment manufactured for Europe and the UK is rated at 220V and operates more efficiently at this level. Forcing appliances to operate at a higher voltage in the UK (242V is the average supply level) leads to significantly higher energy consumption, increased heat losses and a reduced life span. Optimising voltage with powerPerfector brings your supply voltage to the “higher efficiency” operating range of your equipment. Without this, the ‘raw’ supply voltage to your site is likely to be at the top end of the range of voltages your electrical equipment can tolerate. As well as reducing energy consumption, this reduces the strain on your equipment, extending its lifespan according to many of our clients. It is estimated that 90% of sites in the UK are operating at too high a voltage and could therefore benefit from installing a powerPerfector .

Voltage Power Optimisation. The less obvious benefits 

Reduced maintenance, longer life
All electrical equipment has an optimum voltage at which it works best. A powerPerfected supply delivers that optimum and reduces the strain on your electrical equipment, leaving it to work more reliably and for longer.

Better quality power supply
Some things you may have accepted for years as product faults can turn out to be caused by a poor quality power supply. For instance, the life of incandescent light bulbs is almost doubled when the supply voltage is optimised. Now imagine that in relation to an IT network or an expensive piece of manufacturing equipment.

Missing the penalty kick
Power factor penalty charges – which are now uncapped in the UK – can be avoided if your power factor is above 0.95. If your power factor is at around 0.9 at the moment, powerPerfector could remove your exposure to these charges by improving the electrical efficiency of your site.

Lower harmonic distortion and reduced neutral currents
powerPerfectors are able to filter harmonics on the mains incomer. Harmonic distortion is on the increase and can lead to random failures of electronic equipment – particularly computers.

Protection
Common transients – very brief spikes in voltage from the grid – are eliminated by powerPerfector. Transients at this level can cause catastrophic damage to equipment, but smaller, more common transient events will also shorten the life expectancy of electrical equipment over time. As we move toward the Energy Gap the risk of transients increases – The National Portrait Gallery is now better protected.